Cx configurator fdt manual






















CX-PROFIBUS PROFIBUS configurator Advanced configuration tool th at uses FDT/DTM (Field De-vice Tool and Device Type Manager) Technology • The PROFIBUS-DP network topology and system characteristics are defined and then downloaded in the OMRON PROFIBUS Mas-ter Unit • Configuration can be done remotely, via other networks as Ethernet or . Create a network using Cx-Configurator FDT. Using Cx-Configurator FDT, open the Device Catalogue and show PROFINET IO. Highlight PROFINET IO Controller (e.g. CJ1W-PNT21) and click ‘Add Device’. Now add any IO Devices to the Controller (Controller must be highlighted in ‘MyNetwork’ tree). Device Catalogue can be closed now. The configuration of the OMRON Profibus master CJ1W-PRM21 is also described in the PRT1-SCU manual chapter In the enclosed example projects the PRM21 has unit number 4 and profibus address 1 and the PRT1-SCU has profibus slave address 2. The document consists of settings and screen shots for the CX-Configurators-FDT on the following pages.


manuals. Incorrect tightening torque may result in malfunction. • Always use the power supply voltage specified in this manual. • Double-check all the wiring and connection of terminal blocks and connectors before mounting the Units. • Take appropriate measures to prevent foreign objects from entering the unit when mounting or wiring it. The configuration of the OMRON Profibus master CJ1W-PRM21 is also described in the PRT1-SCU manual chapter In the enclosed example projects the PRM21 has unit number 4 and profibus address 1 and the PRT1-SCU has profibus slave address 2. The document consists of settings and screen shots for the CX-Configurators-FDT on the following pages. Configuration d'un réseau profibus avec Cx-Configurator FDT.


CX-Configurator FDT. Configure using FDT/DTM. Advanced network configuration tool built on FDT technology to allow improved support for more advanced. Easily Achieve Position Control with Wading Through User Manuals for special instructions are convenient when programming. CX-Configurator FDT. The section Set-up using the GSDML file discusses the configuration of the. PROFINET IO CX-ConfiguratorFDT using this GSDML file.

0コメント

  • 1000 / 1000